Proposed rule 2026-22373
Airworthiness Directives; MD Helicopters, LLC Helicopters
The FAA proposes to supersede Airworthiness Directive (AD) 90- 19-02, which applies to all MD Helicopters, LLC (type certificate previously held by McDonnell Douglas Helicopter Company) Model 369, 369A, 369D, 369E, 369F, 369FF, 369H, 369HE, 369HM, and 369HS, helicopters, that are equipped with a cargo hook. AD 90-19-02 requires replacing the overrunning clutch assembly and sprag assembly with airworthy parts and repetitively inspecting the sprag assembly, clutch inner and outer races of the overrunning clutch assembly. Since the FAA issued AD 90-19-02, after further analysis the FAA determined that additional helicopter models are affected by this unsafe condition. This proposed AD would expand the applicability and would require removing certain overrunning clutch assemblies and certain overrunning clutch subassemblies from service, installing or replacing parts, and reidentifying certain overrunning clutch assemblies, as applicable. This proposed AD would also require for certain model helicopters, revising the Airworthiness Limitations Section (ALS) of the existing aircraft maintenance manual (AMM) or instructions for continued airworthiness (ICA) and the existing approved maintenance or inspection program, as applicable. The FAA is proposing this AD to address the unsafe condition on these products.
Source-supplied record
Document details
- Document number
- 2026-22373
- Published
- Nov 3, 2026
- Effective
- Not supplied
- Comments close
- Dec 18, 2026 (open)
- Federal Register citation
- 91 FR 69225
Docket identifiers
- Docket No. FAA-2026-11819
- Project Identifier AD-2025-01199-R
CFR references
- Title 14, part 39